I had never used a Tots Bots Easy Fit diaper, but I did use the newborn version, a Tini Fit. Like the Tini Fit, the Easy Fit is made by Tots Bots in Glasgow, Scotland, and distributed in the U.S. by Bummis.
Bummis sent me one of the new version Easy Fits to review, although they won’t be available to purchase until April. I don’t have an old version, and I’ve already sent along my Tini Fit to a new home (it would still fit my son, but I wanted to send all the newborn diapers to my friend at once!) So, I don’t have a side-by-side comparison for you, but I will point out the features that have been changed (including the wider back elastic, which you can see above!) I’m not sure if this is new, but I noticed that the PUL is really soft. It definitely has a different feel than all my other diapers.
Whether you choose hook & loop or snaps (poppers) for your diaper (nappy), they are now color matched. Tots Bots are made in the U.K. so the Tots Bots Facebook page is full of “popper” and “nappy” talk. Tee-hee! The closure tabs are rather stiff on the Tini & Easy Fits, so I really wondered if they’d stay folded back and attached to the laundry tabs. Both the newborn and the big version didn’t give me any trouble. They have a snap down rise to fit babies 8-35 pounds, and the rise snaps are color matched as well.
Above left, I’ve pictured the fleece liner that was included with my diaper. The Easy Fit still has a half sewn-in soaker and brushed polyester side guards to prevent compression leaks. However, instead of a 2 layer soaker made of microfiber & rayon from bamboo, the soaker is 3 layers of color matched minky. This gives you more absorbency with less bulk.
The soaker is super easy to tuck in. It comes out on its own in the wash, but it doesn’t bunch or turn the whole diaper inside out. It gets cleaner & dries faster than an AIO with a completely sewn in soaker, and it’s quicker to stuff the soaker back in than it is to match and stuff pocket diapers. The pocket also allows you to add additional absorbency if you need it. The flap covering the pocket opening on my Tini Fit was the same brushed polyester as the side guards, but this Easy Fit is a different, even softer polyester.
Here is the small setting measured folded & stretched:
Below, I closed the left side of the diaper first. You can overlap the tabs (both of them,) and if you notice, the right tab extends further, allowing you to close the diaper even more tightly if you close the left tab on top of it.
Medium:
You can better see what I mean about the overlap in this picture!
Large:
My older son is 2 years, 9 months old and in the neighborhood of 29ish pounds. I put him in the large setting, and he looks like he has room in this one.
My little guy had just turned 3 months old last week when I took these pictures. He’s around 11 pounds (guessing…he was 10 lbs a month ago) and he’s somewhat slender since he’s a bit taller.
The small setting fits him with no leg gap, without struggling or double checking that it’s snug enough. This is what it looks like all the way closed, with that entire overlap being used.
The Tini Fit was one of my favorite newborn diapers because it gave me the absorbency I needed (with the booster, it was as absorbent as (if not more than) a one-size diaper, but fit far better. The Easy Fit fits my little guy with no gapping or readjusting, and fits my big guy too. Plus, it’s absorbent enough for both of them! My younger son can soak a one-size microfiber insert in 2 hours, and so far the Easy Fit has lasted longer than that without a hint of leaking. That said, I have a hard time comparing the absorbency of inserts since both boys can really have a wide variation in their wetting habits. Since I can’t remove this insert it’s not as easy to tell how wet it is as it is when you yank a sopping wet microfiber insert out of a pocket. I’m still trying to find a good way to test insert absorbency “scientifically,” but Bummis says the old style Easy Fit can hold 17.6 oz (wow!) and I believe this is more absorbent.
You will be able to find the new style Easy Fit (and new prints) at Bummis Retailers in April. The new Tots Bots Easy Fit diapers will still retail for $23.95. You can see new prints & colors in Tots Bots’ Facebook album and they have photos of the inners as well. I pretty much want one in every color. 😉
FTC compliance: I received the pictured diaper at no cost for review purposes. I was not compensated for this post and all opinions are my own.
[…] Easy fit (version 4) to review, and I also compared it to the prior versions. I’ve used the minky version easy fit, and the rayon from bamboo version in the newborn, tini fit […]
[…] First off, we’ve got to say a big “Thank you” to the Thanks Mama store — they sell everything from babywearing gear to cloth diapers to organic clothing for your babe. Thanks Mama is sponsoring the fabulous Tots Bots Easy Fit! Check out my  review of the Tots Bots below. Maria of Change-Diapers has also reviewed the Tots Bots Easy Fit, check that out here. […]
[…] Thank you to sponsor Thanks Mama, a great store that offers cloth diapers, babywearing items and even organic clothing. Thanks Mama is giving away a Tots Bots Easy Fit! Check out Mary’s review of the Tots Bots here, or read my Tots Bots Easy Fit review. […]
[…] used for baby blankets. It is used as an absorbent material in the new Fuzzibunz Elite diapers and Tots Bots Easy Fit diapers. Minky is less prone to staining and smell than microfiber, and doesn’t have the ick […]
I have a totbots easy fit in the old style and I bought it to help with night time. I was so bummed. It is the cutest one we own, even my husband likes it. Well it really did not fair well at all for my heavy wetter. We use it for night but I add a cottonbabies insert and I would say it is 50/50 as to if she is going to leak in it. For daytime use it has never stood up to BG. But I still love the bamboo and the ultra cute prints! Maybe the new version will solve the absorption issues.
I already have two Easy Fits in the old style and love them. Now I want to try this new style! Ugh! 🙂
My favorite feature is the matching snaps. I don’t like snaps that stand out!